AM KustOhm - Alien 327-X Pre-Built Coils - 0.12Ω (70-140w)

AM KustOhm - Alien 327-X Pre-Built Coils - 0.12Ω (70-140w)

Regular price
R 165.00
Sale price
R 165.00
Regular price
Sold out
Unit price
per 

Stock: 3 left

Tax included. Shipping calculated at checkout.

3x27/36ga, 5 wrap, 3mm ID ~ 0.12Ω (70-140w)

To prevent any short-circuit on the coils, use tweezers with ceramic tips.

  • Ensure your coils are installed close to the build deck – short coil legs.
  • Pulse the coils at 30 – 40 watts (pulsing the coils for 0.5 – 1 second at a time until the coils are glowing).
  • Use a ceramic tweezer to squeeze each coil.
  • While pulsing the coils, check for any hot spots (brighter glowing parts).
  • Lightly strum the the area with a ceramic tweezer until no hot spots are visible.
  • After pulsing the coils and checking for hot spots, ensure all post screws are firmly tightened.
  • Before wicking, leave the coils for about 30 seconds to cool down.
  • Make sure to use enough cotton for the wicking. You should be able to move your vape by lightly tugging at the wick.  Medium Resistance between wick and coil

Maintenance

  • DO NOT use a wire/coil brush to clean the coils.
  • After removing old wick, drop wattage to 20 – 30 watts, pulse the coils until they’re glowing.
  • Wait 20 seconds and dunk the coils in lukewarm water.
  • Repeat until any gunk has cleared out of coil.
  • Dry the coils with a paper towel.
  • Remove the atomizer from vape and rinse under tap.
  • Pulse coils again at 20 – 30 watts and check for hot spots, and leave to cool down for 30 seconds.
  • Start to re-wick.